Hazardous substance shelves

The W 100 Environmental Shelf Set from SCHULTE Lagertechnik is the optimal solution for the safe and compliant storage of substances hazardous to water. With a width of 1250 mm , a height of 2000 mm , and a depth of 600 mm , this basic shelf offers a robust platform for your requirements. A key feature is the tightly welded containment sump at the base, which safely collects any leaking liquids, thus preventing environmental pollution. The grid floors allow direct drainage into the sump and are supported on stable CO beams. The load capacity of each storage level is an impressive 538 kg with evenly distributed load. Thanks to the lattice bracing in the frames, the shelf is particularly stable. The beams can be quickly adjusted by simple plugging, and the height-adjustable levels in 25 mm increments allow for flexible use of space. The shelf is suitable for transporting pallet cages with a forklift or pallet truck.

The SCHULTE Environmental Shelving Add-on Unit (Article Number 14861) is specifically designed for the safe storage of substances hazardous to water. With its dimensions of 2000 mm height, 1250 mm width, and 600 mm depth, it offers generous storage capacity. The load capacity of each shelf level is 538 kg with a uniformly distributed load. Stable CO beams support grid mesh floors, which allow any escaping liquids to drain directly into the underlying, tightly welded containment sump. This ensures maximum safety and environmental protection. The shelving unit is characterized by its high stability thanks to lattice bracing and can be quickly adapted using the plug-in system. The storage space is flexibly height-adjustable with a 25 mm grid . The attractive colour scheme (uprights blue, beams orange, bracing galvanized) ensures good visibility. This add-on unit must be combined with a starter unit.

The MULTIplus150 basic shelving unit (article number 14875) from SCHULTE Lagertechnik was specially developed for the demanding task of environmentally sound storage of small containers with hazardous contents. With a depth of 600 mm and a height of 2000 mm, it offers generous and safe storage capacity. Equipped with 4 environmental sump shelves , each with a capacity of 22 liters , this shelving unit effectively protects the subfloor from leaks. The sump shelves made of 3 mm thick, galvanized sheet steel with a edge height of 60 mm are designed for the safe containment of liquids such as oils, paints, or thinners. The delivery includes a declaration of conformity according to StawaR , confirming compliance with legal regulations. The sump shelves can be flexibly adjusted in height in 25 mm increments to optimally adapt them to different container sizes. Each shelf has a load capacity of up to 150 kg . The quick and uncomplicated assembly thanks to the plug-in system makes this basic shelving unit a practical solution for workshops and industrial companies that place the highest value on environmental protection and safety. Note on stability: According to DGUV Rule 108-007 (BGR 234), shelving units with a height/depth ratio greater than 5:1 must be secured against tipping. This can be done by wall or base anchoring or by head bracing.

The add-on shelf MULTIplus150 (item number 14876) from SCHULTE Lagertechnik is specially designed for the safe and environmentally sound storage of small containers with water-polluting contents. The depth of 600 mm allows for the storage of larger containers and offers increased containment volume. Equipped with 4 environmental sump shelves , each sump holds a volume of 22 liters . These are made of 3 mm thick, galvanized sheet steel and, with their 60 mm high edge, offer reliable protection against the leakage of liquids such as oils, paints, or thinners. The shelf is supplied with a declaration of conformity according to StawaR , ensuring regulatory compliance. The sump shelves are flexibly adjustable in height in 25 mm increments, allowing for optimal adaptation to your storage needs. Each shelf has a load capacity of up to 150 kg . The assembly of the add-on shelf is uncomplicated and quick thanks to the simple plug-in system. This shelf is an essential addition for any operation that values safety and environmental protection. Note on stability: According to DGUV Rule 108-007 (BGR 234), shelves with a height/depth ratio greater than 5:1 must be secured against tipping. This can be done by wall or floor anchoring or by head bracing.

The basic shelving unit MULTIplus150 (article number 14870) from SCHULTE Lagertechnik is the ideal base for the safe and environmentally sound storage of small containers, especially of liquids hazardous to water. With a height of 2000 mm and a depth of 500 mm, it offers sufficient space and protection. Equipped with 4 environmental sump floors , each with a volume of 18 liters and a rim height of 60 mm, this shelf reliably protects the floor from contamination by leaking liquids such as oils, paints, or thinners. The sumps are made of robust, 3 mm thick galvanized sheet steel. The shelf is supplied with a Declaration of Conformity according to StawaR , confirming compliance with regulations. The sump floors are flexibly height-adjustable in 25 mm increments, allowing optimal adaptation to the size of your stored goods. Each shelf has a load capacity of up to 150 kg . Assembly is quick and uncomplicated thanks to the simple plug-in system. This basic shelving unit is an essential component for any operation that values safety and environmental protection. Note on stability: According to DGUV Rule 108-007 (BGR 234), shelves with a height/depth ratio greater than 5:1 must be secured against tipping. This can be done by wall or foot anchoring or by bracing.

The MULTIplus150 add-on shelf (item number 14871) from SCHULTE Lagertechnik is the professional solution for the environmentally sound storage of small containers containing substances hazardous to water. The depth of 500 mm and the height of 2000 mm make it a versatile addition to existing shelving systems. Equipped with 4 environmental sump shelves , each with a volume of 18 liters , this shelf offers effective protection against the leakage of liquids such as oils, paints, or thinners. The containment sumps are made of 3 mm thick, galvanized sheet steel and have an edge height of 60 mm. The shelf is supplied with a declaration of conformity according to StawaR , which guarantees compliance with relevant regulations. The sump shelves can be conveniently adjusted in height in 25 mm increments to optimally adapt them to different container sizes. Each shelf has a load capacity of up to 150 kg . The quick and easy assembly using the plug-in system allows for rapid commissioning. This add-on shelf is indispensable for companies that value safety and environmental protection. Note on stability: According to DGUV Rule 108-007 (BGR 234), shelves with a height/depth ratio greater than 5:1 must be secured against tipping. This can be done by wall or floor anchoring or by head bracing.

The MULTIplus150 basic shelf (article number 14942 ) from Gebrüder Schulte is the optimal base for the safe storage of small containers and environmentally sensitive substances. With its dimensions of 2000 x 1000 x 600 mm (H x W x D), it offers a solid and efficient storage solution. This shelf is equipped with 4 tub bases made of galvanized sheet steel, each with an edge height of 60 mm and a volume of 22 liters . These tubs serve as reliable protection against leaking liquids, keeping your storage areas clean and safe. Each tub base can bear a load of up to 150 kg , allowing for the safe storage of heavier containers. The shelf features quick and easy assembly thanks to its practical plug-in system. The universal supports and tub bases can be easily mounted. The tub bases are flexibly adjustable in height in 25 mm increments to optimally adapt to your specific storage requirements. Additional bracing with longitudinal beams ensures high stability. This shelf is designed as a basic shelf and can be extended with add-on shelves. It is the ideal choice for areas where there is a risk of liquid leakage, such as in the chemical industry, crafts, workshops, or laboratories. The galvanized surface protects the shelf from corrosion and ensures a long service life. Please observe the instructions for anti-tip devices according to DGUV Rule 108-007 (BGR 234) for shelves with a height/depth ratio greater than 5:1.

The MULTIplus150 basic shelving unit (article number 14940) from Gebrüder Schulte is the basis for safe and environmentally friendly storage of small containers, especially liquids such as oils, paints, or thinners. The galvanized sheet steel construction ensures robustness and durability. Equipped with 4 spill containment shelves , each with a volume of 18 liters and a lip height of 60 mm, this shelving unit offers maximum protection against leaking liquids. The spill containment shelves are height-adjustable in a practical 25 mm grid and can therefore be optimally adapted to the size of your containers. Each individual spill containment shelf can hold a load of up to 150 kg . In addition to the spill containment shelves, the shelving unit includes another MULTIplus150 cover shelf . Assembly is incredibly simple and time-saving thanks to the proven plug-in system. This basic shelving unit can be used as a standalone unit or as the basis for a shelving row, making it a flexible solution for any storage area that must comply with environmental protection requirements. Important note: Shelving units with a height/depth ratio greater than 5:1 must be secured against tipping according to DGUV Rule 108-007 (BGR 234). This can be done by wall or floor anchoring or by cross-bracing.

The add-on shelving unit MULTIplus150 (article number 14943 ) from Gebrüder Schulte is the ideal solution for the safe storage of small containers and environmentally sensitive substances. With its dimensions of 2000 x 1000 x 600 mm (H x W x D), it offers efficient space utilisation. The special feature of this shelving unit is the 4 spill containment shelves made of galvanised sheet steel, each with a lip height of 60 mm and a capacity of 22 litres . These shelves effectively protect your storage areas from leaking liquids. The load capacity of each spill containment shelf is up to 150 kg , allowing for the safe storage of even heavier containers. Thanks to the practical plug-in system, the universal supports and spill containment shelves can be assembled quickly and easily. The spill containment shelves are flexibly adjustable in height at 25 mm intervals to adapt optimally to your storage needs. The bracing with longitudinal beams ensures additional stability. This shelving unit is designed as an add-on unit and requires a base unit for assembly. It is ideal for storage areas in the chemical industry, trades, workshops, or anywhere where there is a risk of liquid leakage. The galvanised surface ensures high corrosion resistance and durability. Please observe the instructions for anti-tip devices according to DGUV Rule 108-007 (BGR 234) for shelving units with a height/depth ratio greater than 5:1.

The MULTIplus150 add-on shelf (item number 14941) from Gebrüder Schulte is the ideal solution for the safe and environmentally sound storage of small containers, especially liquids. With its galvanized finish, it offers robust protection and a long service life. The shelf has 4 tub bases , each with a usable depth of 500 mm and a volume of 18 liters . These are 60 mm high and reliably catch any leaking liquids to protect the floor and the environment. The tub bases can be flexibly adjusted in height in a 25 mm grid, allowing for adaptation to different container sizes. An additional MULTIplus150 cover shelf completes the equipment. Assembly is particularly quick and easy thanks to the simple plug-in system. Each tub base can be loaded with up to 150 kg . This add-on shelf extends existing shelf rows and is perfect for use in workshops, industrial plants, or storage areas where handling liquids is required. Important note: Shelving with a height/depth ratio greater than 5:1 must be secured against tipping according to DGUV Rule 108-007 (BGR 234). This can be done by anchoring to the wall, floor, or using top braces.

The additional environmental sump base from Gebrüder Schulte offers increased safety when storing liquids. With a capacity of 22 liters and dimensions of 1000 x 600 mm, this base reliably catches even larger quantities of escaping liquids, thus protecting your floor and the environment. Made from 3 mm thick, galvanized sheet steel , this sump base is particularly robust and durable. The galvanized surface offers optimal protection against corrosion and wear. The quick assembly by simply plugging in the universal supports and placing the sump base allows for uncomplicated integration into existing shelving systems. Ideal for use in workshops, production areas, and anywhere where the safe storage of liquids is essential. Rely on the proven quality of SCHULTE Lagertechnik for maximum safety.

The additional environmental sump base from Gebrüder Schulte offers increased safety when storing liquids. With a capacity of 18 liters and dimensions of 1000 x 500 mm, this base reliably catches escaping liquids, effectively protecting your floor and the environment. Made from 3 mm thick, galvanized sheet steel , this sump base is particularly robust and designed for a long service life. The galvanized surface offers excellent protection against corrosion and mechanical stress. Thanks to the simple plug-in system, assembly is quick and uncomplicated. This sump base is the ideal addition to shelving systems in workshops, production areas, and anywhere where the safe storage of liquids is a top priority. Rely on the proven quality of SCHULTE Lagertechnik .

Expand the functionality of your Gebr. Schulte Environmental Shelving Unit W100 with this practical add-on shelf . With a generous area of 1250 x 600 mm , it offers additional storage space for small containers and operating materials that must be stored in compliance with the law. The add-on shelf is supplied including a stable grid mesh , which ensures a safe and level surface. The attractive colour scheme in Orange/Galvanized blends harmoniously into the existing shelving structure. This shelf is specifically designed for the Environmental Shelving Unit W100 and allows for quick and uncomplicated assembly. Ideal for companies that need to expand their storage capacity for environmentally hazardous or sensitive liquids. Use this add-on shelf to optimize your storage organization and meet the requirements for hazardous substance storage.

Enhance the safety of your warehouse with the additional spill containment tray from Gebrüder Schulte. This tray, measuring 1000 x 600 mm and with a capacity of 22 liters , is specifically designed to safely collect any leaking liquids, thus protecting your floor from damage and contamination. Made from high-quality, 1.5 mm galvanized sheet steel , this spill containment tray offers excellent resistance to corrosion and wear. The galvanized surface ensures a long service life. The quick assembly by simply plugging in the universal supports and placing the tray allows for uncomplicated integration into existing shelving systems. Ideal for workshops, production areas, or anywhere liquids are stored. Rely on the proven quality of SCHULTE Lagertechnik for your safety requirements.

The additional spill containment tray from Gebrüder Schulte is the practical solution for equipping your existing shelving systems with an additional layer of safety. With its dimensions of 1000 x 500 mm and a volume of 18 liters , this tray reliably collects any leaking liquids, thus preventing damage to the floor and the environment. Made from 1.5 mm thick galvanized sheet steel , this spill containment tray offers high resistance and durability. The galvanized surface effectively protects against corrosion. Thanks to the well-thought-out design, the tray can be easily integrated into compatible shelving systems. This solution is ideal for areas where liquids are handled and additional protection is essential. Trust in the quality of SCHULTE Lagertechnik for safe and clean storage solutions.