Anbauregal, Büro-Fachbodenregal Schraubsystem MULTIplus150, 2000 x 1000 x 600 mm (HxBxT), 6 Fachböden, verzinkt, mit Mittelanschag

SCHULTE MULTIplus150 office shelving unit with bolted system, Anbauregal. Overall dimensions 2000 x 1003 x 600 mm (H x W x D), shelf depth incl. profile approx. 606 mm, 6 shelves, shelf load 150 kg, bay load 730 kg, galvanised finish, shelves verzinkt, T-profile/angle profile verzinkt, bracing galvanised, foot plates black, MP shelves perforated for centre stop, 25 mm adjustment pitch, accessible from both sides, single free-standing unit.

Product features

• up to 96 lever-arch files per shelving bay
• usable from both sides
• with centre stop to prevent files being pushed through or falling out
• The top shelf has no centre stop.
• optimum adaptation thanks to MULTIplus150 shelves with 25 mm edge
• ideal for building free-standing shelving installations
• bracing by corner brackets

Description

Office shelving units with bolted system are the robust and economical solution for filing and organising your documents in single-tier shelving installations. These office shelving units accommodate up to 192 files per bay with the reliable stability of the SCHULTE bolted system. An extensive range of accessories is available to adapt the unit to your individual requirements.

• economical system
• files cannot slip through thanks to the optional stop rail or centre stops
• high flexibility and easy replacement of accessories with MULTIplus system perforation
• The stated load capacities apply to evenly distributed loads per shelf.
• File heights (OH) indicate the number of storage levels.
• Shelving units with a height-to-depth ratio greater than 5:1 must be secured against tipping in accordance with DGUV Rule 108-007 (BGR 234).
• Example: an office shelving unit usable from one side with a depth of 300 mm and a height of 1,800 mm must be secured by wall anchoring. An office shelving unit usable from both sides with a depth of 600 mm may be installed up to a height of 3,000 mm without anti-tip protection.
• Starter bay: nominal length + 6 mm
• Add-on bay: nominal length + 3 mm
• Total frame depth: nominal depth + 6 mm
• Buckling length: the first shelf must be fitted at a height of 100 mm. The free buckling length must not exceed 500 mm. Greater buckling lengths available on request.