Pallet rack upright frame S645-B25, unassembled, 7500x800 mm, blue/galvanized
Item No.: 46211Effizienter Palettenregal-Ständerahmen (7500x800 mm) von Gebrüder Schulte für optimierte Lagerorganisation.
- Optimale Lagerhöhe von 7500 mm
- Robuste Bauweise für hohe Belastungen
- Deutsche Qualität von Gebrüder Schulte
- Einfache Montage dank zerlegter Lieferung
- Sichere und stabile Bodenverankerung
Why Kreckler GmbH?
- Free shipping from €250 (within Germany)
- Personal advice from storage experts
- In-house 3D configurator for made-to-measure shelving
- Business portal: quotes, invoices & direct discount
Description
The Pallet rack upright frame S645-B25 with a height of 7500 mm and a depth of 800 mm from Gebrüder Schulte is a reliable solution for storing pallets in industrial environments, especially where space is limited in depth.
The height adjustment of the beams in the 50 mm grid allows flexible adaptation to your storage requirements. This allows you to create customized storage compartments for your products and optimize the use of space.
The frame is delivered disassembled to simplify transport. It consists of 2 supports, the C-frame, 2 base plates, 4 floor anchors and 2 shims (2 mm). The blue powder-coated uprights and the galvanized frame offer effective protection against corrosion.
Important note on load capacity: The actual load capacity of the upright frame depends on various factors, such as the beam used, the buckling height and the place of use. For a precise design and advice, please contact our team of experts.
Frequently asked questions about Upright Frames
The bay load applies per beam pair, i.e. per level. The frame load applies to the entire upright across all levels. You must not exceed either value.
Heights from around 2000 mm to over 6000 mm are common. The 50 mm hole pitch lets you adjust the levels flexibly to suit your pallets.
This is not advisable. The hole pattern and profile differ from system to system. Beams and frames must come from the same system, otherwise the connection is unsafe.
When the uprights are bent or the diagonals are damaged. Even small dents reduce the load capacity considerably. Replacement is safer than repair.
Yes, at the lower corner uprights. Forklifts easily damage the uprights. An impact guard absorbs the impact and protects the rack's load capacity.
Monthly guides and discount offers by email
Subscribe to our newsletter and receive exclusive offers and news.